[[Uses]]



Add New Page: You are not allowed to add pages Select section/namespace. New page title.
 

Table of Contents

Uses

add a mesh enabled device to a new mesh network

add a mesh enabled device to an existing mesh network

  • Get an existing mesh networks configuration
  • Install Commotion on a device
  • Upload a mesh profile

add a sensor to a new mesh network

  • Install commotion on a device
  • Connect a device to a Commotion node (ethernet or wirelessly through MDNS)
    • MDNS advertisement from sensor
      • Install & Set up Avahi
      • Install & set up ServalD
      • connect device to node wirelessly
    • Ethernet Connection from sensor
      • Allow ethernet traffic to be passed to the mesh
      • Allow mesh traffic to be passed to ethernet
      • Enable specific traffic to pass through the firewall
      • Create an advertisement on the application portal (if publicly accessable)

add a sensor to an existing mesh network

  • Connect a device to a Commotion node (ethernet or wirelessly through MDNS)
    • MDNS advertisement from sensor
      • Install & Set up Avahi
      • Install & set up ServalD
      • Connect device to node wirelessly
    • Ethernet Connection from sensor
      • Allow ethernet traffic to be passed to the mesh
      • Allow mesh traffic to be passed to ethernet
      • Enable specific traffic to pass through the firewall
      • Create an advertisement on the application portal (if publicly accessable)

add a service / client device to a new mesh network

  • Install commotion on a device
  • Connect a device to a Commotion node (ethernet or wirelessly through MDNS)
    • MDNS advertisement from service/client
      • Install & Set up Avahi
      • Install & set up ServalD
      • connect device to node wirelessly
    • Ethernet Connection from service/client
      • Allow ethernet traffic to be passed to the mesh
      • Allow mesh traffic to be passed to ethernet
      • Enable specific traffic to pass through the firewall
      • Create an advertisement on the application portal (if publicly accessable)

add a service / client device to an existing mesh network

  • Connect a device to a Commotion node (ethernet or wirelessly through MDNS)
    • MDNS advertisement from sensor
      • Install & Set up Avahi
      • Install & set up ServalD
      • Connect device to node wirelessly
    • Ethernet Connection from sensor
      • Allow ethernet traffic to be passed to the mesh
      • Allow mesh traffic to be passed to ethernet
      • Enable specific traffic to pass through the firewall
      • Create an advertisement on the application portal (if publicly accessable)

add content to a node on new mesh network

add a mesh enabled device to a new mesh network

  • Create an advertisement on the application portal (if publicly accessable)
  • Application specific instructions

add content to a server / client on a new mesh network

add a mesh enabled device to a new mesh network AddServiceNewMesh][add a service / client device to a new mesh network

  • Create an advertisement on the application portal (if publicly accessable)
  • Application specific instructions

add content to a node on an existing mesh network

AddNodeExistingMesh][add a mesh enabled device to an existing mesh network AddServiceExistingMesh][add a service / client device to an existing mesh network

  • Create an advertisement on the application portal (if publicly accessable)
  • Application specific instructions

add content to a client on an existing mesh network

AddNodeExistingMesh][add a mesh enabled device to an existing mesh network AddServiceExistingMesh][add a service / client device to an existing mesh network

  • Create an advertisement on the application portal (if publicly accessable)
  • Application specific instructions

add a gateway to a new mesh network

add a mesh enabled device to a new mesh network

  • Allow ethernet traffic to be passed to the mesh (zones)
  • Allow mesh traffic to be passed to ethernet (zones)
  • Enable specific traffic to pass through the firewall

add a gateway to an existing mesh network

  • Allow ethernet traffic to be passed to the mesh (zones)
  • Allow mesh traffic to be passed to ethernet (zones)
  • Enable specific traffic to pass through the firewall

add a gateway between a new node and an existing mesh network

NEED IMAGE HERE

add a mesh enabled device to a new mesh network

  • Allow ethernet traffic to be passed to the mesh (zones)
  • Allow mesh traffic to be passed to ethernet (zones)
  • Enable specific traffic to pass through the firewall
  • Configuring a interfaces routing protocol
    • Customizing a Commotion profile
    • Loading a Commotion profile
    • Running two different routing protocols on two different interfaces

add a gateway between two existing mesh networks

NEED IMAGE HERE

  • Allow ethernet traffic to be passed to the mesh (zones)
  • Allow mesh traffic to be passed to ethernet (zones)
  • Enable specific traffic to pass through the firewall

support a mesh enabled device to a new mesh network

support a mesh enabled device to an existing mesh network

support a sensor to a new mesh network

support a sensor to an existing mesh network

support a service / client device to a new mesh network

support a service / client device to an existing mesh network

support a gateway to a new mesh network

support a gateway to an existing mesh network

use a mesh enabled device on a new mesh network

use a mesh enabled device on an existing mesh network

use a sensor to a new mesh network

use a sensor to an existing mesh network

use a service / client device on a new mesh network

use a service / client device on an existing mesh network

use content on a mesh node on a new mesh network

use content on a mesh node on an existing mesh network

use content on a client/service device on a new mesh network

use content on a client/service device on an existing mesh network

use a gateway to a new mesh network

use a gateway to an existing mesh network